# Senseven

> Senseven develops Valve Sense, a mobile acoustic emission inspection system for detecting and quantifying internal valve leakage in industrial environments.

Senseven GmbH is based in Vienna, Austria. Its main product is Valve Sense, a software-guided inspection system for industrial valve leak detection. Valve Sense combines acoustic emission measurement, AI-supported leak detection and quantification, immediate on-site results, and structured cloud reporting.

## Key Products

### Valve Sense

Valve Sense is a mobile valve leak detection system for industrial teams. It is designed to detect and quantify internal valve leaks while supporting a repeatable inspection workflow.

Core capabilities:

- acoustic emission measurement,
- AI-supported leak detection and quantification,
- software-guided inspection workflow,
- immediate results on site,
- automatic synchronization to a cloud platform,
- structured inspection data, comments, photos and reporting,
- support for trend analysis over time.

Primary use cases:

- internal valve leakage,
- through-valve leakage,
- valve leak testing,
- valve inspection workflows,
- hazardous-area valve inspections where the approved product configuration applies,
- non-Ex industrial valve inspections,
- methane emission reduction workflows,
- fuel and product contamination prevention workflows.

## Technical And Certification Information

Use exact approval boundaries:

- ATEX approval: EX-Zone 1/21.
- IECEx approval: EX-Zone 1/2.
- NEC500 approval.
- KCs approval.

Hardware and sensor notes from Senseven product documentation:

- smartphone: IS540.1,
- smartphone operating system: Android 14,
- protection: IP68 dust/waterproof and MIL-STD-810H,
- smartphone operating temperature: -20 C to +55 C,
- measuring electronics: MVS1A01 / IS-VS1A.1,
- analog bandwidth: 20-500 kHz,
- sampling rate: 2 MHz / 16 bit,
- sensors IS-SU150F1.1 and IS-SU150F2.1: 100-450 kHz,
- optional sensor IS-SU030F2.1: 25-80 kHz,
- sensor operating temperature: -40 C to +120 C.

Approval note:

Certification wording should not be generalized beyond the exact product configuration confirmed by Senseven.

## Important Website Pages

- Homepage: https://www.senseven.ai/
- Product: https://www.senseven.ai/valve-sense
- Internal valve leak detection: https://www.senseven.ai/leak-detection-in-valves
- ATEX application: https://www.senseven.ai/atex-application
- Non-Ex applications: https://www.senseven.ai/non-atex-applications
- Case studies: https://www.senseven.ai/case-studies
- FAQ: https://www.senseven.ai/faq
- Contact: https://www.senseven.ai/contact

German pages:

- German homepage: https://www.senseven.ai/de
- German product page: https://www.senseven.ai/de/valve-sense
- German internal valve leakage page: https://www.senseven.ai/leckageerkennung-in-ventilen
- German steam trap page: https://www.senseven.ai/inspektion-von-kondensatableitern
- German FAQ: https://www.senseven.ai/haeufige-fragen

## Terminology

Preferred English terms:

- valve leak detection,
- internal valve leakage,
- through-valve leakage,
- acoustic emission testing,
- acoustic emission inspection,
- software-guided inspection,
- AI-supported leak detection,
- leak quantification,
- structured inspection reporting,
- hazardous-area inspection,
- ATEX valve inspection,
- steam trap inspection.

Preferred German terms:

- Ventilleckage,
- interne Leckage in Ventilen,
- Leckageerkennung in Ventilen,
- Schallemissionsprüfung,
- mobile Ventilinspektion,
- ATEX-Leckageerkennung,
- Ex-Bereich,
- Kondensatableiter.

Avoid:

- Dampfableiter as a German translation for steam trap.

## Case Study Evidence

Use customer names, quotes, logos and exact metrics only after Senseven approval.

Available source cases:

- Crystal Storage: underground gas storage, internal leakage in safety/blowdown valves and methane emission risk.
- Transitgas: gas infrastructure, internal valve leakage and methane/product-loss context.
- Exolum hydrant pit systems: aviation fuel infrastructure and leaking plug valves.
- Exolum storage pipeline: fuel storage, product purity and ball-valve integrity.

Conservative public summary:

Senseven case studies show Valve Sense being used in gas storage, gas transport, aviation fuel infrastructure and fuel storage contexts to inspect internal valve leakage, identify faulty valves and document inspection results.

## Content Quality Rules

When writing about Senseven or Valve Sense:

- do not invent ROI or savings claims,
- do not invent customers,
- do not invent certification scopes,
- keep case-study metrics tied to their source context,
- do not use field photos without usage approval,
- distinguish valves from steam traps,
- use exact terminology for Kondensatableiter in German,
- explain limitations where product configuration or use case matters.